Short answer
Download PCHealthLab, tick the CPU, GPU & Thermal area, choose Quick test and press ANALYZE. The program loads the processor and the graphics card and draws a live CPU and GPU temperature chart during the test. The result then appears in the list of findings and in the HTML report.
Step by step
-
Run PCHealthLab
A single file, nothing gets installed. At start the program asks for administrator rights (UAC); without them it could not read temperatures or the other values.
-
Allow the temperature driver
Core temperatures are read through the signed PawnIO driver. It is not bundled: when PCHealthLab needs it, it asks, downloads the official installer from GitHub with your consent, verifies its digital signature and only then runs it. If you decline, the program carries on and says core temperatures cannot be read.
-
Choose the area and test length
Keep CPU, GPU & Thermal ticked at the top (you can untick the other areas). Quick test loads the processor and graphics for 30 seconds, Long test for 5 minutes. The line below the checkboxes estimates the test duration up front.
-
Watch the chart
After pressing ANALYZE, a live CPU and GPU temperature chart is drawn. The real processor clock including turbo is measured at the same time. Stop ends the test at any moment.
-
Read the findings and the report
Results are sorted from worst to best (Critical, Warning, Info, OK). After the analysis, Open report opens an HTML report with the temperature charts that you can keep or send.
What temperature is fine
The exact limits are set by the chip maker and vary by model. In general:
- At idle the processor sits a little above room temperature, laptops somewhat higher.
- Under full load 60–85 °C is common for desktops, and thin laptops run right below their maximum. Modern processors are designed for that.
- A warning sign is the temperature jumping to the maximum within seconds while the clock speed drops. That is overheating (thermal throttling): the processor slows down to protect itself.
- For the graphics card the gap between the core temperature and the hot spot matters too. A large gap reveals poor cooler contact; see when to replace thermal paste.
Things to keep in mind
- Without the PawnIO driver no program can read core temperatures, which is why every tool that shows them ships a driver. PawnIO is compatible with Memory Integrity and is removed in Apps & features.
- On laptops with two graphics chips the load runs on the high-performance card chosen by Windows, and the temperature is read from the same card. More in My laptop has two GPUs.
- Measure the computer the way you normally use it: a laptop on a desk, not on a duvet, and a desktop with its case closed.