Short answer
Run PCHealthLab, tick the Storage & S.M.A.R.T. area and press ANALYZE. The program reads drive health and wear through S.M.A.R.T. and runs a read test that bypasses the Windows cache and finds bad blocks with their position. Disk errors from the system log appear in the System Integrity & Logs area.
Step by step
-
Back up what is not backed up
If you suspect a failing drive, copy your important data first. The read test puts load on the drive, and a drive on the edge can die for good during the test.
-
Run PCHealthLab and select the drives
The program runs as administrator, otherwise it could not read the raw disk. Tick Storage & S.M.A.R.T. and, for context, System Integrity & Logs.
-
Choose the read test length
Quick test reads each volume for 60 seconds, Long test up to 30 minutes per volume and goes through it more thoroughly. Reads bypass the Windows cache, so the result reflects the real drive, not RAM.
-
Go through the findings
Findings are sorted from worst. For drives you see S.M.A.R.T. health and wear (SATA and NVMe), free space, read speed and its fluctuation, and any bad blocks with their position. From the event log the program pulls disk errors and names the device they relate to.
-
Save the report
Open report opens an HTML report that works as evidence for a drive warranty claim.
What the findings mean
| Finding | What to do |
|---|---|
| Bad blocks in the read test | The drive is losing data. Back up and replace it. |
| High SSD wear | The drive is nearing the end of its write endurance. Plan a replacement. |
| Read speed swings and drops sharply | A struggling drive reads only after retries. A typical cause of stutter. |
| Disk errors in the system log | Windows has already hit a read or write error. Take it seriously even if S.M.A.R.T. still looks fine. |
Things to keep in mind
- For a quick overview without a load test use MHSysInfo: its Disk drives category shows the model, interface, status, power-on hours, wear and temperature. It sees these values only under an administrator account.
- Not every controller reports S.M.A.R.T. values, especially drives in USB enclosures. Then the read test and the event log are what remain.
- When exactly the drive stalled is shown by EventAnalyzer: it groups disk errors and translates system device names into a specific drive with model and serial number.
- PCHealthLab offers the Force TRIM on all SSD volumes fix. It does not repair a failing drive, but on an SSD where TRIM was not running it can restore write speed.