Short answer
Run AccuInfo and look at two things: the battery health and the live power draw in watts in the right-hand chart. If health is below 70 %, the battery is worn. If health is decent but the draw during ordinary work is high, a program or a setting is draining it and a new battery would not help.
Step by step
-
Run AccuInfo on battery
Unplug the adapter and run
AccuInfo.exe. Nothing gets installed and no administrator rights are needed. The program reads everything from the battery controller right away and starts drawing the charts. -
Check health and cycles
In the left panel compare the design capacity with the full charge capacity. Their ratio is the battery health. Then look at the cycle count: heavy wear after only a few cycles points to a faulty cell.
-
Watch the power draw
The right-hand chart shows the power the laptop takes from the battery right now. Let it run for a few minutes during your usual work. The remaining time field is an estimate from the current draw, so it tells you directly how long the battery would last under this load.
-
Try a load
Start something demanding and watch the charge chart. If the percentage drops several points at once, or the laptop shuts down before reaching zero, the cells no longer hold their voltage and the battery needs replacing, even if the health figure looks fine.
-
Save a report
Save report… writes a single HTML file with every value and the charts. It is useful for a warranty claim or when ordering a replacement, because it includes the battery manufacturer, model and serial number.
The battery, or something else?
| What you see | What it most likely means |
|---|---|
| Health below 70 %, normal draw | A worn battery. Replacing it brings the runtime back. |
| Health above 80 %, high draw at idle | Software is draining the battery: a background program, screen brightness, a performance power plan, the dedicated GPU. A new battery would last just as briefly. |
| Charge drops in steps, shutdown at 10–20 % | A faulty or tired cell. Replace the battery regardless of the health percentage. |
| Few cycles, low health | The battery failed early. For a laptop under warranty, that is grounds for a claim. |
Things to keep in mind
- Measure the draw after a few minutes, not right after power-on. Just after start Windows indexes, updates and syncs, and the draw is higher than usual.
- Some manufacturers fill in the design capacity loosely, so health can come out oddly low or above 100 %. Always read it together with the cycle count.
- If you also want to know whether the rest of the laptop is fine (disk, temperatures, system), run PCHealthLab. Its long test also measures the power draw in watts for two minutes.