Short answer
Download LanAtlas, run it on a PC in that network and press F5. It takes the address range from the network adapter and in about fifteen seconds lists every device that is on, with its name, IP and MAC address, manufacturer and open services. No installation, no administrator rights.
Step by step
-
Run LanAtlas in the network you want to see
A single
LanAtlas.exe. The PC must be connected to that network – by cable or Wi-Fi. -
Start the scan
F5 checks every address at once. Each address gets a ping and an ARP query; within its own subnet every device that is on has to answer ARP, so even PCs that drop ping are found.
-
Go through the list
The columns show the name (from DNS, NetBIOS, mDNS or the device's web page), IP and MAC address, the Manufacturer by MAC address, open services and shared folders. In grey italics in the Category column the program suggests whether it is a printer, camera, router, phone…
-
Name and categorise devices
F2 or right-click: name, category and a note. Accept suggested category confirms the suggestion, even for several rows at once. The description is tied to the MAC address, so it survives an IP change.
-
Save the network description
Ctrl+S saves a
.lanatlasfile; next time names are matched automatically after the scan. Ctrl+R saves an HTML report or a CSV for Excel.
Devices that are on only now and then
A single scan only catches what is on at that moment. A phone that joins for a while, or a laptop that arrives at ten, would be missed. Tick Repeat every [30] min and leave LanAtlas running all day:
- devices are only added; whatever switched off stays in grey with its "Last seen" time,
- the Online since column shows when each device came online,
- a phone that gets a different IP during the day stays in the list once – it is recognised by its MAC.
Things to keep in mind
- Only scan networks that are yours or that you have been entrusted with.
- Phones on Wi-Fi in power-saving mode often do not answer even ARP, so they appear and disappear on repeated scans.
- Behind a router (another subnet, VPN) only ping is left – neither the MAC address nor the manufacturer can be found there. Scan from a PC inside that subnet.
- Something in the list you do not recognise? Continue with Is there an unknown device on my network?