Short answer
Download LanAtlas, run it and press F5. In about fifteen seconds you see every device that is switched on, with its IP address, name, manufacturer and open services. A printer gives itself away with a print port (9100, IPP), a camera with RTSP and a NAS with shared folders. Type the manufacturer into the Filter box and the list narrows to the device you want.
Step by step
-
Run LanAtlas on a PC in the same network
It is a single
LanAtlas.exefile, it does not install and needs no administrator rights. The PC has to be connected to the network the device is on, by cable or Wi-Fi. -
Start the scan
The program takes the address range from the network adapter, or you type one in. F5 starts the scan. Every address gets a ping and an ARP request, so devices that ignore ping are found too.
-
Find the device in the list
The Manufacturer column (vendor from the MAC address, such as HP, Brother, Hikvision, Synology), Services and Category help, where the program suggests in grey italics whether it is a printer, camera, NAS or router. Ctrl+F jumps to the filter; part of a name, vendor or service is enough.
-
Open its web interface
A double-click opens the most useful thing: shared folders, otherwise the web interface. The right-click menu also opens HTTP, HTTPS, FTP or starts a ping.
-
Give the device a name
F2 names the device ("Reception printer") and puts it in a category. Ctrl+S saves the description to a
.lanatlasfile. Next time the name is matched after the scan even if the device got a different IP address, because the program recognises it by its MAC address.
How to recognise the device
| Device | What gives it away in the list |
|---|---|
| Printer | Print port 9100 or IPP in Services, a vendor such as HP, Canon, Brother, Epson. |
| Camera | The RTSP (video) service and a camera vendor, often the title of its web page too. |
| NAS | Windows sharing (SMB) and shared folders in the Shares column, a Synology, QNAP or WD name or vendor. |
| Router | A note in Comments that it is the gateway, a web interface on HTTP or HTTPS. |
Names come from DNS, NetBIOS, mDNS (used by printers, Apple and smart home devices) or from the title of the device's web page. Hover over a row and a tooltip explains why the program suggested that category.
Things to keep in mind
- To stop a printer or camera from changing its address, give it a fixed (reserved) DHCP address in the router. The MAC address the router asks for is right there in the MAC address column.
- Behind another router or over VPN the scan can only use ping. A device that drops ping stays invisible there. Scanning from a PC inside that subnet helps.
- If the printer is not in the list at all, it is switched off or on a different network. Which installed printers respond is shown by PrinterAdmin.
- Only scan networks that are yours or that you have been entrusted with.