Short answer
Run LanAuditPro in the network the camera is on and press F5. For each camera the audit asks the one question the protocol itself offers: will you let me in without a password? If it does, you get a finding such as "Camera video can be watched without a password", with advice on how to close it. It never tries passwords, not even default ones.
Step by step
-
Run the audit
Download
LanAuditPro.exe, run it on a PC in the same network as the camera and press F5. No installation and no administrator rights are needed. -
Find the camera in the Devices tab
The program recognises cameras by ONVIF announcements, service banners, the web page and the vendor from the MAC address, and for many it also finds the model and firmware.
-
Go through its findings
In the Findings tab look especially for: RTSP video without a password, a camera snapshot without a password, ONVIF without login, a non-activated Hikvision camera and Hikvision firmware older than the fix for the critical 2021 flaw. Each finding has advice and evidence on the right.
-
Close what is open
Double-click the camera in Devices to open its web interface. In its settings, turn on authentication for RTSP and ONVIF, set a strong password and update the firmware from the vendor's website.
-
Check that it worked
Run the audit again. The finding should be gone, and the comparison with the previous audit shows what changed.
What each finding means
| Finding | What it means |
|---|---|
| RTSP video without a password | Anyone on the network (or a compromised device on it) can play the live picture in an ordinary media player. |
| Snapshot without a password | The camera's web address hands out the current picture without login. |
| ONVIF without login | The camera can be controlled or its settings read through the standard protocol without a password. |
| Non-activated Hikvision camera | The camera has no password yet; anyone on the network can activate it. |
| Old Hikvision firmware | Firmware older than the fix for the critical 2021 flaw. The age is inferred from the dates of the web interface files, because the camera reveals its version only after login; the finding says so explicitly. |
These findings are rated High or above: anyone on the network gets at another device's data without a password. With two critical findings the network is graded F.
Things to keep in mind
- The audit sees the network from the inside. Whether the camera is reachable from the internet it can only tell from UPnP forwarding; check manually forwarded router ports yourself.
- Cameras ideally belong in a separate network (guest Wi-Fi or a VLAN), not alongside your PCs and NAS. The audit warns about a mixed network.
- The program opens connections sparingly, because older cameras stop responding under heavier load. If a camera drops out briefly during the audit, it usually recovers on its own.
- Only check cameras and networks that are yours or that you have been entrusted with.